FM PRODUCTS
Exciters
Solid State Amplifiers
Solid State Transmitters
Tube Amplifiers
Tube Transmitters
DAB Transmitters
Remote and Telemetry
Microwave Radio Links
Coders/Decoders
Audio Equipment
Radio Link Antennas
Transmitting Antennas
Antenna Splitters
Cable for Antenna Systems
Example Antenna Systems
Filters
Voltage Regulators
Protection Systems
Accessories

ITEL S.r.l.
Via Friuli, 6 - 33074
Fontanafredda (PN) - ITALY
 
- phone +39 0434 997667
- fax +39 0434 997687
- email: info.itel@itelcast.com
- web: www.itelcast.com
EXCITERS
CODE

INFO

DESCRIPTION

FT 20 STL LINK Portable transmitter with external frequency selector, 82-108 MHz, 0-15 W adjustable, 12 VDC, complete with mike and antenna. Others frequency bands on request.
FT 20 LINK FM exciter for high quality digital audio. Synthesized, steps 10 kHz, 0-30 W adjustable, SCA/RDS inputs. Fully compatible with all digital audio sources. (See below options available).
FT 30 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 30 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.) .
FT 60 LINK Compact high quality-signal FM transmitter. 0-60 W out adjustable, synthesized, agile frequency setting, excellent S/N ratio (> 78 dB), SCA/RDS inputs, electronic protections, complete metering. (See below options available).
FT 60 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 60 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.) .
FT 120 LINK Compact high quality-signal FM transmitter. 0-110 W out adjustable, synthesized, agile frequency setting, excellent S/N ratio (> 78 dB), SCA/RDS inputs, electronic protections, complete metering. (See below options available).
FT 120 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 120 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.)
FT 200 LINK Compact high quality-signal FM transmitter. 0-200 W out adjustable, new Cold-Fet™ technology, freq. programmable, excellent S/N ratio (> 78 dB), SCA/RDS inputs, proportional foldback protection, complete metering. (See below options available).
FT 200 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 200 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.) .
FT 300 LINK Compact high quality-signal FM transmitter. 0-300 W out adjustable, new Cold-Fet™ technology, freq. programmable, excellent S/N ratio (> 78 dB), SCA/RDS inputs, proportional foldback protection, complete metering. (See below options available).
FT 300 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 320 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.) .
FT 500 LINK Compact high quality-signal FM transmitter. 0-500 W out adjustable, new Cold-Fet™ technology, freq. programmable, excellent S/N ratio (> 78 dB), SCA/RDS inputs, proportional foldback protection, complete metering. (See below options available)
FT 500 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 550 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.) .
FT 1000 LINK Compact high quality-signal FM transmitter. 0-1000 W out adjustable, new Cold-Fet™ technology, freq. programmable, excellent S/N ratio (> 78 dB), SCA/RDS inputs, proportional foldback protection, complete metering. (See below options available)
FT 1000 LCD LINK Digital/analog audio compatible FM exciter. Superior audio quality for composite or mono operations. Graphic LCD front panel display for full control and measurements. 0 - 1.050 W out, 87.5-108 MHz touch frequency setting, SCAs, mono/MPX, dynamic limiter, remote control & telemetry (opt.) .
Options for FT 20/60/120/200/300/500/1000 and LCD series
CODE

INFO

DESCRIPTION

/S   High performance built - in DIGITAL STEREO GENERATOR , stereo separation > 78 dB.
/C   Front panel frequency setting .
/P   Built-in STEREO AUDIO PROCESSOR
/R   Remote control interface.
/K   FSK IDer. for FCC automatic identification system.
/HS   High frequency stability < 300 Hz.
/SCA3   Additional 2 x SCA/RDS inputs.
/VDC-24   24 Vdc power supply. ( for FT 20, FT 30 LCD, FT 60 LCD , FT 30 , FT 120 ).
/VDC-48   48 Vdc power supply. ( for FT 200, FT 300, FT 500, PM 1000, FT 200 LCD, FT 30 LCD, FT 500 LCD, FT 1000 LCD) .


SOLID STATE AMPLIFIERS
CODE

INFO

DESCRIPTION

FA 100 LINK 0-120 W output (adjustable) with 0-10 W input, broadband, fully protected. Air cooled.
FA 300 LINK 0-320 W out (adjustable) with 0-10 W input, new Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Air cooled.
FA 500 LINK 0-550 W out (adjustable) with 0-12 W input, new Cold-Fet™technology, broadband, proportional foldback logic for uninterrupted service. Air cooled.
FA 1000 LINK "0-1.050 W out (adjustable) with 0-16 W input. 3HE/19" rack. New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. Air cooled. "
FA 1000F/U2   "0-1050 W plug-in module amplifier without cabinet and cooling system to use as up-grading module in FA 1000FS power amplifier or as spare unit in FA series amplifiers. Dimensions: 2HE/19"."
FA 1000FS   "0-1.050 W Up-Gradable amplifier composed by 1 x FA 1000F/U2 plug-in module and 1 x 14HE/19" rack with air cooling system. This amplifier can be up-graded up to 2 or 3 kW adding 2/3 FA 1000F/U2 modules and a 2/3-way combiner."
KFCU/2   2-way combiner and control unit to up-grade to 2 kW the output power of FA 1000F/U3 amplifier. Includes in/out connecting cables.
KFCU/3   3-way combiner and control unit to up-grade to 3 kW the output power of FA 1000F/U3 amplifier. Includes in/out connecting cables.
FA 2000FS LINK "0-2.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 2 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
FA 2500F/5U   "0-2.500 W plug-in module amplifier without cabinet and cooling system to use as up-grading module in FA 2500F/U5 power amplifier or as spare unit in 5Kw-10Kw-15Kw-20Kw-30Kw series amplifiers. Dimensions: 5HE/19"."
FA 2500FS M2.5 LINK "Compact single cabinet amplifier. 0 - 2.500 W out (adj.) with 0-10 W input . Use as up-grading module in 1 x FA 2500F/U5 power amplifier . Dimensions: 5HE/19". New Cold-Fet™ technology, broadband, proportional foldback protection logic for uninterrupted service. Air cooled. Includes 19"x 5U cabinet."
FA 3000FS LINK "0-3.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 3 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
FA 4000FS LINK "0-4.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 4 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
FA 5000FS LINK "0-5.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 5 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
FA 5000FS M2.5 LINK "Compact single cabinet amplifier. 0 - 2.500 W out (adj.) with 0-10 W input . Use as up-grading module in 2 x FA 2500F/U5 power amplifier . Dimensions: 5HE/19". New Cold-Fet™ technology, broadband, proportional foldback protection logic for uninterrupted service. Air cooled. Includes 19" cabinet."
FA 6000FS LINK "0-6.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 6 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system."
FA 10000FS LINK "0-10.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 10 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system."
FA 10000FS M2.5   "Compact single cabinet amplifier. 0 - 2.500 W out (adj.) with 0-10 W input . Use as up-grading module in 4 x FA 2500F/U5 power amplifier . Dimensions: 5HE/19". New Cold-Fet™ technology, broadband, proportional foldback protection logic for uninterrupted service. Air cooled. Includes 19" cabinet."
FA 12000FS LINK "0-12000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 12 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
FA 20000FS LINK "0-20.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 20 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
FA 30000FS LINK "0-30.000 W amplifier , out (adjustable) with 0-16 W input. Up-Gradable amplifier composed by 30 x FA 1000F/U2 plug-in module . New Cold-Fet™ technology, broadband, proportional foldback logic for uninterrupted service. Direct AC/DC switching power supply without step-down transformer. 19" rack with air cooling system. "
Remote Control Interfaces for FA Amplifiers
CODE

INFO

DESCRIPTION

KFA/RC   Full remote control interface for FA 300, FA 500, FA 1000 amplifiers.
KFS/RC   Full remote control interface for FA 2000FS, FA 3000FS, FA 4000FS, FA 5000FS, FA 6000FS, FA 10000FS, FA 12000FS amplifiers.
Remote Control Interfaces for FA Amplifiers
CODE

INFO

DESCRIPTION

KF/RC/20/K   Full remote control interface for FA 20000FS amplifier.
KF/RC/30/K   Full remote control interface for FA 30000FS amplifier.
Cabinets for FA 300F, FA 500, FA 1000 Models
CODE

INFO

DESCRIPTION

RK 19-6U   "19"-5U cabinet."
RK 19-6U   "19"-6U cabinet."
RK 19-9U   "19"-9U cabinet."
RK 19-24U   "19"-24U cabinet."
RK 19-41U   "19"-41U cabinet."
COOLING OPTIONS FOR FA SERIES
CODE

INFO

DESCRIPTION

   

All FA series amplifiers are available with exhaust cooling air exit either on the rear panel or on the top side of cabinet. Please specify your choice upon order.

   

Chemineys and hardware for exhaust cooling air are available on request.



SOLID STATE TRANSMITTERS
CODE

INFO

DESCRIPTION

FT 100S LINK 100 W solid state FM transmitter composed of: FT 20, FA 100.
FT 100S LCD LINK 100 W solid state FM transmitter composed of: FT 30 LCD, FA 100.
FT 300S LINK 300 W solid state FM transmitter composed of: FT 20, FA 300, RK 19-6U cabinet.
FT 300S LCD LINK 300 W solid state FM transmitter composed of: FT 30 LCD, FA 300, RK 19-6U cabinet.
FT 500S LINK 550 W solid state FM transmitter composed of: FT 20, FA 500, RK 19-6U cabinet.
FT 500S LCD LINK 550 W solid state FM transmitter composed of: FT 30 LCD, FA 500, RK 19-6U cabinet.
FT 1000S LINK 1.050 W solid state FM transmitter composed of: FT 20, FA 1000, RK 19-5U cabinet.
FT 1000S LCD LINK 1.050 W solid state FM transmitter composed of: FT 30 LCD, FA 1000F, RK 19-5U cabinet.
FT 1000FS   1.050 W Up-Gradable transmitter composed of: FT 20, FA 1000F/U3. (See above for up-grading parts)
FT 1000FS LCD   1.050 W Up-Gradable transmitter composed of: FT 30 LCD, FA 1000FS. (See above for up-grading parts)
FT 2000FS LINK "2.000 W solid state FM transmitter composed of: FT 20, FA 100, FA 2000FS, 19" cabinet."
FT 2000FS LCD LINK "2.000 W solid state FM transmitter composed of: FT 30 , FA 2000FS, 19" cabinet."
FT 2500FS M2.5 LINK "2.500 W solid state FM transmitter composed of: FT 20, FA 2500FS M2.5, 19" cabinet."
FT 2500FS LCD M2.5 LINK "2.500 W solid state FM transmitter composed of: FT 30 LCD, FA 2500FS M2.5, 19" x 5U cabinet."
FT 3000FS LINK "3.000 W solid state FM transmitter composed of: FT 20, FA 100, FA 3000FS, 19" cabinet."
FT 3000FS LCD LINK "3.000 W solid state FM transmitter composed of: FT 30 LCD, FA 100, FA 3000FS, 19" cabinet."
FT 4000FS LINK "4.000 W solid state FM transmitter composed of: FT 20, FA 100, FA 4000FS, 19" cabinet."
FT 4000FS LCD LINK "4.000 W solid state FM transmitter composed of: FT 30 LCD, FA 100, FA 4000FS, 19" cabinet."
FT 5000FS LINK "5.000 W solid state FM transmitter composed of: FT 20, FA 300F, FA 5000DS, 19" cabinet."
FT 5000FS LCD LINK "5.000 W solid state FM transmitter composed of: FT 30 LCD, FA 5000FS, 19" cabinet."
FT 5000FS M2.5 LINK "5.000 W solid state FM transmitter composed of: FT 20, FA 2500FS M2.5, 19" x 12U cabinet."
FT 5000FS LCD M2.5 LINK "5.000 W solid state FM transmitter composed of: FT 30 LCD, FA 5000FS M2.5, 19" x 12U cabinet."
FT 6000FS LINK "6.000 W solid state FM transmitter composed of: FT 20, FA 300F, FA 6000FS, 19" cabinet."
FT 6000FS LCD LINK "6.000 W solid state FM transmitter composed of: FT 30 LCD, FA 6000FS, 19" cabinet."
FT 10000FS LINK "10.000 W solid state FM transmitter composed of: FT 20, FA 500, FA 1000FS, 19" cabinet."
FT 10000FS LCD LINK "10.000 W solid state FM transmitter composed of: FT 30 LCD, FA 500, FA 1000FS, 19" cabinet."
FT 10000FS M2.5   "10.000 W solid state FM transmitter composed of: FT 20 , FT 10000FS M.2.5, 19" cabinet."
FT 10000FS LCD M2.5   "10.000 W solid state FM transmitter composed of: FT 30 , FT 10000FS M.2.5, 19" cabinet."
FT 12000FS LINK "12.000 W solid state FM transmitter composed of: FT 20, FA 500F, FA 12000FS, 19" cabinet."
FT 12000FS LCD LINK "12.000 W solid state FM transmitter composed of: FT 30 LCD, FA 500F, FA 12000FS, 19" cabinet."
FT 20000FS LINK "20.000 W solid state FM transmitter composed of: FT 20, FA 1000FS, FA 20000FS, 2x19" cabinet. "
FT 20000FS LCD LINK "20.000 W solid state FM transmitter composed of: FT 30 LCD, FA 1000F, FA 20000FS, 2x19" cabinet."
FT 30000FS LINK "30.000 W solid state FM transmitter composed of: FT 2000FS, FA 30000FS, 2x19" cab."
FT 30000FS LCD LINK "30.000 W solid state FM transmitter composed of: FT 2000FS LCD, FA 30000FS, 3x19" cab."
Options for Solid State FM Transmitters
CODE

INFO

DESCRIPTION

/S   High performance built-in DIGITAL STEREO GENERATOR, stereo separation > 78 dB. For FT and LCD exciters and transmitters .
   

"for remote control interfaces, air chimneys and standard or special cabinets see above "SOLID STATE MOS-FET AMPLIFIERS" section."



TUBE AMPLIFIERS
CODE

INFO

DESCRIPTION

FA 1000T LINK 0-1000 W output (adj.), 0-20 W input, fully protected. Tube included.
FA 1500T LINK 0-1600 W output (adj.), 0-40 W input, fully protected. Tube included.
FA 2500T LINK 0-2400 W output (adj.), 0-65 W input, fully protected. Tube included.
FA 6000T LINK 0-6000 W output (adj.), 0-250 W input, fully protected. High efficiency cavity. 220/380 Vac, three-phase power supply. Tube included.
FA 6000T/M LINK 0-6000 W output (adj.), 0-250 W input, fully protected. High efficiency cavity. 110/240 Vac, single-phase power supply. Tube included.
FA 10000T LINK 0-10000 W output (adj.), 0-450 W input, fully protected. Three phase power supply. High efficiency cavity. Tube included.
FA 10000T/M LINK 0-10000 W output (adj.), 0-450 W input, fully protected. High efficiency cavity. 110/220 Vac, single-phase power supply. Tube included.
FA 12000 LINK 0-12000 W output (adj.), 0-500 W input, fully protected. High efficiency cavity. Tube included.
FA 15000 LINK 0-15000 W output (adj.), 0-800 W input, fully protected, tube included. High efficiency cavity. Tube included.
FA 20000T LINK 0-20000 W output (adj.), 0-1000 W input, fully protected. High efficiency cavity. Tube included.
FA 35000T LINK 0-35000 W output (adj.), 0-1000 W input, fully protected. High efficiency cavity. Tube included.
FA 60000T   0-60000 W output (adj.), 0-2000 W input, fully protected. High efficiency cavity. Water cooled. Exernal water coling system and tube included.


TUBE TRANSMITTERS
CODE

INFO

DESCRIPTION

FT 1000T LINK 1000 W tube FM transmitter composed of: FT 20, FA 1000T.
FT 1000T LCD LINK 1000 W tube FM transmitter composed of: FT 30 LCD, FA 1000T.
FT 1500T LINK 1500 W tube FM transmitter composed of: FT 20, FA 100, FA 1500T.
FT 1500T LCD LINK 1500 W tube FM transmitter composed of: FT 30 LCD, FA 100, FA 1500T.
FT 2500T LINK 2500 W tube FM transmitter composed of: FT 120, FA 2500T.
FT 2500T LINK 2500 W tube FM transmitter composed of: FT 20, FA 100, FA 2500T.
FT 2500T LCD LINK 2500 W tube FM transmitter composed of: FT 30 LCD, FA 100, FA 2500T.
FT 6000T LINK 6000 W tube FM transmitter composed of: FT 300, FA 6000T.
FT 6000T LINK 6000 W tube FM transmitter composed of: FT 20, FA 300F, FA 6000T.
FT 6000T LCD LINK 6000 W tube FM transmitter composed of: FT 30 LCD, FA 300F, FA 6000T.
FT 10000T LINK 10000 W tube FM transmitter composed of: FT 500, FA 10000T.
FT 10000T LINK 10000 W tube FM transmitter composed of: FT 20, FA 500F, FA 10000T.
FT 10000T LCD LINK 10000 W tube FM transmitter composed of: FT 30 LCD, FA 500F, FA 10000T.
FT 12000T LINK 12000 W tube FM transmitter composed of: FT 500, FA 12000T.
FT 12000T LINK 12000 W tube FM transmitter composed of: FT 20, FA 500F, FA 12000T.
FT 12000T LCD LINK 12000 W tube FM transmitter composed of: FT 30 LCD, FA 500F, FA 12000T.
FT 15000T LINK 15000 W tube FM transmitter composed of: FT 20, FA 1000F, FA 15000T.
FT 15000T LCD LINK 15000 W tube FM transmitter composed of: FT 30 LCD, FA 1000F, FA 15000T.
FT 20000T LINK 20000 W tube FM transmitter composed of: FT 20, FA 1000F, FA 20000T.
FT 20000T LCD LINK 20000 W tube FM transmitter composed of: FA 30 LCD, FA 1000F, FA 20000T.
FT 35000T LINK 35000 W tube FM transmitter composed of: FT 20, FA 1000F, FA 35000T.
FT 35000T LCD LINK 35000 W tube FM transmitter composed of: FT 30 LCD, FA 1000F, FT 35000T.
FT 60000T   60000 W tube FM transmitter composed of: FT 20, FA 2000, FA 60000T.
FT 60000T LCD   60000 W tube FM transmitter composed of: FT 30 LCD, FA 2000, FA 60000T.
Options for Tube FM Transmitters
CODE

INFO

DESCRIPTION

/S   High performance built-in DIGITAL STEREO GENERATOR, stereo separation > 78 dB. For KE, KCL and PM exciters and for all versions /TK and /TP and /TLD transmitters.
/R2M   Interface for remote control and telemetry of all main parameters.


DAB TRANSMITTERS
CODE

INFO

DESCRIPTION

DAB05/3B   DAB high performances COFDM modulator, III Band RF output. Intuitive and easy complete front panel control with LCD display with direct channel selection. Remote control facility available as option with SNMP protocol or through RS232 or RS485. Compliant with ETS 300 401, 300 799 and EU147.
DAB05/L   As DAB05/3B but with L-Band RF output.
DABT 15/V   "DAB Transmitter, VHF band, 15 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 15 Wrms amplifier, output DAB filter and 19" rack."
DABT 40/V   "DAB Transmitter, VHF band, 40 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 40 Wrms amplifier, output DAB filter and 19" rack."
DABT 80/V   "DAB Transmitter, VHF band, 80 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 80 Wrms amplifier, output DAB filter and 19" rack."
DABT 150/V   "DAB Transmitter, VHF band, 150 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 150 Wrms amplifier, output DAB filter and 19" rack."
DABT 300/V   "DAB Transmitter, VHF band, 300 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 300 Wrms amplifier, output DAB filter and 19" rack."
DABT 400/V   "DAB Transmitter, VHF band, 400 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 400 Wrms amplifier, output DAB filter and 19" rack."
DABT 500/V   "DAB Transmitter, VHF band, 500 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 500 Wrms amplifier, output DAB filter and 19" rack."
DABT 800/V   "DAB Transmitter, VHF band, 800 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 800 Wrms amplifier, output DAB filter and 19" rack."
DABT 1500/V   "DAB Transmitter, VHF band, 1500 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 1500 Wrms amplifier, output DAB filter and 19" rack."
DABT 3000/V   "DAB Transmitter, VHF band, 3000 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 3000 Wrms amplifier, output DAB filter and 19" rack."
DABT 6000/V   "DAB Transmitter, VHF band, 6000 Wrms output power. Includes DAB05/3B high performances COFDM modulator, 6000 Wrms amplifier, output DAB filter and 19" rack."
DABT 15/L   "DAB Transmitter, L band, 15 Wrms output power. Includes DAB05/L high performances COFDM modulator, 15 Wrms amplifier, output DAB filter and 19" rack."
DABT 80/L   "DAB Transmitter, L band, 80 Wrms output power. Includes DAB05/L high performances COFDM modulator, 80 Wrms amplifier, output DAB filter and 19" rack."
DABT 160/L   "DAB Transmitter, L band, 160 Wrms output power. Includes DAB05/L high performances COFDM modulator, 160 Wrms amplifier, output DAB filter and 19" rack."
Options for DAB Transmitters
CODE

INFO

DESCRIPTION

SNMP/RC   Remote control with SNMP interface
   

For L band DAB transmitters quotations please contact us at +39 0434 997667 or itel.tech@itelcast.com



REMOTE AND TELEMETRY
CODE

INFO

DESCRIPTION

TM/RC 232 LINK Remote control and telemetry interface with direct PC (RS 232) connection to control & monitor the main parameters of transmitter through telephonic line, GSM or radio link. 8 digital inputs, 8 analog inputs, 8 on-off switches. Fully compatible with all standard telephonic modems. PC software included.
GM/08 LINK GSM modem for remote control and telemetry.
RM/12   Modem for remote control and telemetry via radio transceivers.
ACO1/FM03 LINK Automatic changeover system for 1+1 operations. 0.3+0.3 kW. Includes RF switchers.
ACO1/FM12 LINK Automatic changeover system for 1+1 operations. 1,2+1,2 kW. Includes RF switchers.
ACO1/FM36 LINK Automatic changeover system for 1+1 operations. 3,6+3,6 kW. Includes RF switchers.
ACO1/FM120 LINK Automatic changeover system for 1+1 operations. 12+12 kW. Includes RF switchers.
ACO1/FM240 LINK Automatic changeover system for 1+1 operations. 24+24 kW. Includes RF switchers.
ACO2/FM03   Automatic changeover system for 2 + 1 operations. 0.3 + 0.3 + 0.3 kW. Includes RF switchers.
ACO2/FM12   Automatic changeover system for 2 + 1 operations. 1,2 + 1,2 + 1,2 kW. Includes RF switchers.
ACO2/FM36   Automatic changeover system for 2 + 1 operations. 3,6 + 3,6 + 3,6 kW. Includes RF switchers.
ACO2/FM120   Automatic changeover system for 2 + 1 operations. 12 + 12 + 12 kW. Includes RF switchers.
ACO2/FM240   Automatic changeover system for 2 + 1 operations. 24 + 24 + 24 kW. Includes RF switchers.
   

Note: the above changeover prices do not includes the dummy load. For 3+1, 4+1 and 5+1 operations prices available on request.



MICROWAVE RADIO LINKS
CODE

INFO

DESCRIPTION

   

"Note: For a built-in stereo generator see the options below.All the composite radio links are compatible with the digital codecs (see "coders/decoders for digital links"section). "

48 - 80 MHz band
CODE

INFO

DESCRIPTION

FT 1B STL LINK Portable transmitter with external frequency selector, 52-70 MHz, 0-15 W adjustable, 12 VDC, complete with mike and antenna.
FT 1B LINK STL transmitter for mono or composite operations. Compatible with digital audio. Operating frequency: 48÷80 MHz. Agile frequency programmability. Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control, Vdc power supply.
FR 1B LINK Synthesized receiver, 48-80 MHz. Out: audio mono, MPX, IF 10.7 MHz.
FZ 1B LINK Synthesized transposer. Input: 48-1020 MHz. Out: 15 W in 48-80 MHz band.
80 - 108 MHz band
CODE

INFO

DESCRIPTION

FR FM LINK Synthesized receiver, 80-108 MHz. Out: audio mono, MPX, IF 10.7 MHz.
FZ FM LINK Synthesized transposer. Input: 48-1020 MHz. Out: 20 W in 87.5-108 MHz band.
160 - 300 MHz band
CODE

INFO

DESCRIPTION

FT 3B STL LINK Portable transmitter with external frequency selector, 172-250 MHz, 0-12 W adjustable, 12 VDC, complete with mike and antenna.
FT 3B LINK STL transmitter for mono or composite operations. Compatible with digital audio. Operating frequency: 160÷300 MHz. Agile frequency programmability. Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control, Vdc power supply.
FR 3B LINK Synthesized receiver, 160-300 MHz. Out: audio mono, MPX, IF 10.7 MHz.
FZ 3B LINK Synthesized transposer. Input: 48-1020 MHz. Out: 15 W in 160-300 MHz band.
300 - 512 MHz band
CODE

INFO

DESCRIPTION

FT 4B STL LINK Portable transmitter with external frequency selector, 250-512 MHz, 0-12 W adjustable, 12 VDC, complete with mike and antenna.
FT 4B LINK STL transmitter for mono or composite operations. Compatible with digital audio. Operating frequency: 300 ÷ 512 MHz. Agile frequency programmability. Output power 15 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control, Vdc power supply.
FR 4B LINK Synthesized receiver, 300-512 MHz. Out: audio mono, MPX, IF 10.7 MHz.
FZ 4B LINK Synthesized transposer. Input: 48-1020 MHz. Out: 15 W in 300-512 MHz band.
512 - 830 MHz band
CODE

INFO

DESCRIPTION

FT 5B STL LINK Portable transmitter with external frequency selector, 512-860 MHz, 0-8 W adjustable, 12 VDC, complete with mike and antenna.
FT 5B LINK STL transmitter for mono or composite operations. Compatible with digital audio. Operating frequency: 512 ÷ 830 MHz. Agile frequency programmability. Output power 0÷5 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control, Vdc power supply.
FR 5B LINK Synthesized receiver, 512-830 MHz. Out: audio mono, MPX, IF 10.7 MHz.
FZ 5B LINK Synthesized transposer. Input: 48-1020 MHz. Out: 5 W in 512-830 MHz band.
830 - 1020 MHz band
CODE

INFO

DESCRIPTION

FT 1G STL LINK Portable transmitter with external frequency selector, 860-1020 MHz, 0-8 W adjustable, 12 VDC, complete with mike and antenna.
FT 1G LINK STL transmitter for mono or composite operations. Compatible with digital audio. Operating frequency: 830 ÷ 1020 MHz. Agile frequency programmability. Output power 0÷8 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control, Vdc power supply.
FR 1G LINK Synthesized receiver, 830-1020 MHz. Out: audio mono, MPX, IF 10.7 MHz.
FZ 1G LINK Synthesized transposer. Input: 48-1020 MHz. Out: 8 W in 830-1020 MHz band.
FA 25S 1G LINK 830-1020 MHz solid state amplifier. 0-25 W out adjustable with 0-3 W input, broadband, fully protected.
1.1 - 2.7 GHz band
CODE

INFO

DESCRIPTION

FT 2 2G LINK STL transmitter for mono or composite operations. Compatible with digital audio. Operating frequency: 1.1 ÷ 2.7 MHz. Agile frequency programmability. Output power 2 W, adjustable. SCA/RDS inputs. Up 86 dB typical S/N ratio. Options: front panel frequency setting, remote control, Vdc power supply.
FT 5 2G LINK As above with 5 W output power.
FA 25 2G LINK 1.1-2.7 MHz solid state amplifier. 0-25 W out adjustable with 0-2 W input, broadband, fully protected.
FR 2G LINK Synthesized receiver, 1.1-2.7 GHz. Out: audio mono, MPX, IF 10.7 MHz.
FX 2 2G LINK Aural STL IF converter. Input: IF 70 MHz, output: 2 W on 1500-2500 MHz band.
FX 5 2G LINK Aural STL IF converter. Input: IF 70 MHz, output: 5 W on 1500-2500 MHz band.
IF modulators and demodulators for microwave links
CODE

INFO

DESCRIPTION

FMM   IF modulator for FMT series transmitters. Synthesized, minimum step 125 kHz. Output freq.: 1000÷1400 MHz, channel bandwidth 3.2 MHz. Capacity: 1 baseband channel suitable for 2/4 digital programs (standard) plus 1 or 2 mono/MPX/digital programs (optional with AMT subcarriers option below).
FMD   IF demodulator for FMR series receivers. Synthesized, minimum step 125 kHz. Input freq.: 1000÷1400 MHz, channel bandwidth 3.2 MHz. 1 baseband channel suitable for 2/4 digital programs (standard) plus 1 or 2 mono/MPX/digital programs (optional with AMR subcarriers option below). IF 70 MHz ouput available.
5.6 - 9.9 GHz Complete Radio Links & Transposers
CODE

INFO

DESCRIPTION

FML 8G 02W 06P LINK 5.6 - 9.9 GHz complete radio link composed of: 0.2 W transmitter (FMT 8/02), receiver (FMR 8), IF modulator (MT), IF demodulator (MR), 2 x 0,6 mt parabolas (PAR06/8G). Capacity: 1 baseband channel suitable for 2/4 digital programs (standard) plus 1 or 2 mono/MPX/digital programs (optional with AMT subcarriers option below).
FML 8G 1W 06P LINK As above with FMT 8/1, 1 W output power transmitter.
FML 8G 4W 06P LINK As above with FMT 8/4, 4 W output power transmitter.
FML 8G 6W 06P LINK As above with FMT 8/6, 6 W output power transmitter.
FML 8G 8W 06P LINK As above with FMT 8/8, 8 W output power transmitter.
FMZ 8G 1W 06P LINK 5.6 - 9.9 GHz complete transposer composed of: 0.2 W transmitter (FMT 8/02/70), receiver (FMR 8/70), 2 x 0,6 mt parabolas (PAR06/8G), RF cables, AL/HM power supply, and H/W accessories.
FMZ 8G 1W 06P LINK As above with FMT 8/1/70, 1 W output power transmitter.
FMZ 8G 4W 06P LINK As above with FMT 8/4/70, 4 W output power transmitter.
FMZ 8G 6W 06P LINK As above with FMT 8/6/70, 6 W output power transmitter.
FMZ 8G 8W 06P LINK As above with FMT 8/8/70, 8 W output power transmitter.
   

"Note:For other parabolic antenna sizes see the "radio link antennas" section. "

5.6 - 9.9 GHz Radio Link Parts
CODE

INFO

DESCRIPTION

FMX 8G 01W LINK Microwave transmitter. Input IF 1000÷1400 MHz, output 0.2 W on the 5.6 - 9.9 GHz. Waterproof box for rear parabolic antenna installation. Options: high frequency stability, IF 70 MHz (see below).
FMT 8G 1W LINK As above with 1 W output power.
FMT 8G 4W LINK As above with 4 W output power.
FMT 8G 6W LINK As above with 6 W output power.
FMT 8G 8W LINK As above with 8 W output power.
FMR 8G LINK Microwave receiver. Input 5.6 - 9.9 GHz antenna signal, output IF 1000÷1400 MHz. Waterproof box for rear parabolic antenna installation. Options: high frequency stability, IF 70 MHz (see below).
10.1 - 12.7 GHz Radio Links & Transposers
CODE

INFO

DESCRIPTION

FML 10G 02W 06P LINK 10.1 - 12.7 GHz complete radio link composed of: 0.2 W transmitter (FMT 10/02), receiver (FMR 10), IF modulator (MT), IF demodulator (MR), 2 x 0,6 mt parabolas (PAR06/10G).Capacity: 1 baseband channel suitable for 2/4 digital programs (standard) plus 1 or 2 mono/MPX/digital programs (optional with AMT subcarriers option below).
FML 10G 1W 06P LINK As above with 1 W output power.
FML 10G 4W 06P LINK As above with 4 W output power.
FML 10G 6W 06P LINK As above with 6 W output power.
FML 10G 8W 06P LINK As above with 8 W output power.
FMZ 10G 02W 06P LINK 10.1 - 12.7 GHz complete transposer composed of: 0.2 W transmitter (FMT 10/02/70), receiver (FMR 10/70), 2 x 0,6 mt parabolas (PAR06/10G), RF cables, AL/HM power supply, and H/W accessories.
FMZ 10G 1W 06P LINK As above with FMT 10/1/70, 1 W output power transmitter.
FMZ 10G 4W 06P LINK As above with FMT 10/4/70, 4 W output power.
FMZ 10G 6W 06P LINK As above with FMT 10/6/70, 6 W output power.
FMZ 10G 8W 06P LINK As above with FMT 10/8/70, 8 W output power.
   

"Note:For others parabolic antenna sizes see the "radio link antennas" section. "

10.1 - 12.7 GHz Radio Links Parts
CODE

INFO

DESCRIPTION

FMT 10G 02W LINK Microwave transmitter. Input IF 1000÷1400 MHz, output 0.2 W on the 10.1 - 12.7 GHz band. Waterproof box for rear parabolic antenna installation. Options: high frequency stability, IF 70 MHz (see below).
FMT 10G 1W LINK As above with 1 W output power.
FMT 10G 4W LINK As above with 4 W output power.
FMT 10G 6W LINK As above with 6 W output power.
FMT 10G 8W LINK As above with 8 W output power.
FMR 10G LINK Microwave receiver. Input 10.1 - 12.7 GHz antenna signal, output IF 1000÷1400 MHz band. Waterproof box for rear parabolic antenna installation. Options: high frequency stability, IF 70 MHz (see below).
12.8 - 14.9 GHz Radio Links & Transposers
CODE

INFO

DESCRIPTION

FMT 14G 1W LINK 12.8 - 14.9 GHz complete radio link composed of: 1 W transmitter (FMT 14/02), receiver (FMR 14), IF modulator (MT), IF demodulator (MR), 2 x 0,6 mt parabolas (PAR06/14G). Capacity: 1 baseband channel suitable for 2/4 digital programs (standard) plus 1 or 2 mono/MPX/digital programs (optional with AMT subcarriers option below).
FMT 14G 4W LINK As above with 4 W output power.
FMT 14G 6W LINK As above with 6 W output power.
FMT 14G 8W LINK As above with 8 W output power.
FMZ 14G 1W 06P LINK 12.8 - 14.9 GHz complete transposer composed of: 1 W transmitter (FMT 14/02/70), receiver (FMR 14/70), 2 x 0,6 mt parabolas (PAR06/14G), RF cables, AL/HM power supply, and H/W accessories.
FMZ 14G 4W 06P LINK As above with FMT 14/4/70, 4 W output power transmitter.
FMZ 14G 6W 06P LINK As above with FMT 14/6/70, 6 W output power transmitter.
FMZ 14G 8W 06P LINK As above with FMT 14/8/70, 8 W output power transmitter.
   

"Note:For others parabolic antenna sizes see the "radio link antennas" section. "

12.8 - 14.9 GHz Radio Links Parts
CODE

INFO

DESCRIPTION

FML 14G 1W 06P LINK Microwave transmitter. Input IF 1000÷1400 MHz, output 1 W on the 12.8 - 14.9 GHz band. Waterproof box for rear parabolic antenna installation. Options: high frequency stability, IF 70 MHz (see below).
FML 14G 4W 06P LINK As above with 4 W output power.
FML 14G 6W 06P LINK As above with 6 W output power.
FML 14G 8W 06P LINK As above with 8 W output power.
FMR 14G LINK Microwave receiver. Input 12.8 - 14.9 GHz antenna signal, output IF 1000÷1400 MHz band. Waterproof box for rear parabolic antenna installation. Options: high frequency stability, IF 70 MHz (see below).
Options for Composite Radio Links
CODE

INFO

DESCRIPTION

/LD   Graphic LCD front panel display for full control and measurements for KE and KV link transmitters and receivers
/S   High performances (stereo separation > 74 dB) built-in DIGITAL STEREO GENERATOR option for radio link transmitters (available for KE series only).
/VDC   12/24/48 Vdc power supply.
AMT   Each additional audio channel for MT microwave transmitter.
AMR   Each additional audio channel for MR microwave receiver.
MD 70   IF 70 MHz for MT, MR IF modulators/demodulators.
TR 70   IF 70 MHz for FMT, FMR, microwave transmitters/receivers.
HFS 10   Frequency stability <10 ppm for FMT and FMR microwave transmitters/receivers.
HFS 05   Frequency stability < 5 ppm for FMT and FMR microwave transmitters/receivers.
AL/HM   110/220 Vac power supply for microwave receiver and transmitter in transposer configuration.


CODERS/DECODERS
CODE

INFO

DESCRIPTION

TD2/16 LINK 16-bit digital audio coder. Input: 2 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 150 kHz channel bandwidth.
RD2/16 LINK 16-bit digital audio decoder. Output: 2 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 150 kHz channel bandwidth.
TD4/16 LINK 16-bit digital audio coder. Input: 4 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 240 kHz channel bandwidth.
RD4/16 LINK 16-bit digital audio decoder. Output: 4 x 15 KHz high quality audio channels. Compatible with all composite STL with a minimum 240 kHz channel bandwidth.
RPD/2 LINK 2 channels digital repeater. Like RD2/16 or R2/HD3 with RD-RCS option but without audio channel outputs.
RPD/4 LINK 4 channels digital repeater. Like RD4/16 or R4/HD3 with RD-RCS option but without audio channel outputs.
Options for Digital Coders/Decoders
CODE

INFO

DESCRIPTION

DAC   4.8 kbps data channel interface for TD2/16, TD4/16, T2/HD3, T4/HD3.
DAD   4.8 kbps data channel interface for RD2/16, RD4/16, R2/HD3, R4/HD3.
DAC RDS   RDS and 4.8 kbps data channel interface for TD2/16, TD4/16, T2/HD3, T4/HD3.
DAD RDS   RDS and 4.8 kbps data channel interface for RD2/16, RD4/16, R2/HD3, R4/HD3.
DAC AEBU   AES/EBU interface for TD2/16, TD4/16, T2/HD3, T4/HD3.
DAD AEBU   AES/EBU interface for RD2/16 and RD2/16, RD4/16, R2/HD3, R4/HD3.
DAD RCS   Regenerated coded signal output interface in RD/16 and R/HD3 for multi-hops STL.


AUDIO EQUIPMENT
CODE

INFO

DESCRIPTION

SAP 2000 LINK Analog audio processor. Settable AVG/PEAK program to optimize compression, expansion and limiting functions. Three sub-band operations.
FLD-03 LINK Digital audio processor. Three sub-band operations. Includes PC software.
FLD-03-S LINK Digital audio processor. Three sub-band operations. Includes built-in digital stereo generator and PC software.
RD-FLD-03   Radio Data System ( RDS ) optional board for FLD-03-S audio processor.
FLD-05-SE LINK Digital audio processor. Five sub-band operations. Includes built-in stereo enhancer and PC software.
Stereo Coders, Stereo-Enhancers, Limiters and RDS Coders
CODE

INFO

DESCRIPTION

RD-FLD-05   Radio Data System ( RDS ) optional board for FLD-05-SE audio processor.
LM-SE-02   Stereo enhancer, digital stereo generator, MPX clipper, limiter and PC software.
DSG LINK "Digital stereo generator. New "MSC™" technology for top quality audio. Superior stereo separation (> 78 dB) in the whole band (10 Hz ÷ 15 kHz). S/N ³ 84 dB."
RDS-MZ03   Radio Data System (RDS) option for Mozart-03 stereo generator.
DBDS 232 LINK Radio Data System (RDS) encoder. Pylot synchro, programmable messages by PC and RS232 interface. All main functions and PC software included.
SE-DS-L04   Digital stereo generator with Radio Data System ( RDS ). Includes limiter, stereo-enhancer, MPX clipper, and PC software.
Broadcast Consoles
CODE

INFO

DESCRIPTION

ACL-62-TM LINK 6x2 inputs complete audio console with 2 telephone hybrids, loudspeaker monitor and microphone line. Without tones equalization.
ACL-62-TM-TE LINK 6x2 inputs complete audio console with 2 telephone hybrids, loudspeaker monitor and microphone line. Includes tones equalization.
PCL-TM   Complete portable audio console with 1 telephone hybrid, loudspeaker monitor and microphone line.
ACF-08   8 inputs frame for audio console. Master/Sub, 4 V-meters.
ACF-18   18 inputs frame for audio console. Master/Sub, 4 V-meters.
ACF-28   28 inputs frame for audio console. Master/Sub, 4 V-meters.
ACF-MML   Micro/Line module. Mono, without tono control.
ACF-SLL   Line/Line module. Stereo, without tono control.
ACF-SPL   Phono/Line module. Stereo, without tono control.
ACF-TEL   Interface for external telephone hybrids.
ACF-ITE   Telephonic module with built-in telephone hybrid.
ACF-SCT   10 units script tray.
ACF-CMO   Cover blank module.
Telephone Hybrids
CODE

INFO

DESCRIPTION

CTHY-01-02   Compact telephone hybrid. 1 line, 2 wires.
THY-01-02   Studio telephone hybrid. 1 line, 2 wires.
THY-02-02   Studio telephone hybrid. 2 lines, 2 wires.


RADIO LINK ANTENNAS
CODE

INFO

DESCRIPTION

RAV Y1B   52-68 MHz directional, gain 6.8 dB, 3 MHz band. Aluminium, N connector. Max. power 600 W
LOG 1B   45-81 Mhz,broadband, gain 6 dB. Logarithmic. Aluminium, N connector. Max. power 100 W
LOG FM LINK 87.5-108 MHz, broadband, gain 7.5 dB. Logarithmic. Aluminium, N connector. Max. power 100 W
LOG FM PRO   High power 87.5-108 MHz logarithmic antenna, broadband, gain 8 dB. Max. power 400 W. Aluminium, N connector.
LOG 3B LINK 174-230 MHz, broadband, gain 8 dB. Logarithmic. Aluminium, N connector. Max. power 100 W
LOG 3B PRO   High power 174-230 MHz logarithmic antenna, broadband, gain 9 dB. Max. power 200 W. Aluminium, N connector.
LOG 4B LINK 230-470 MHz, broadband, gain 7.5 dB. Logarithmic. Aluminium, N connector. Max. Power 50 W
LOG 4B PRO   High power 230-470 MHz logarithmic antenna, broadband, gain 8.5 dB. Max. power 200 W. Aluminium, N connector.
LOG 5B LINK 470-860 MHz, broadband gain 10.5 dB. Logarithmic. Aluminium, N connector. Max. power 50 W
LOG 5B PRO   High power 470-860 MHz logarithmic antenna, broadband, gain 11 dB. Max. power 100 W. Aluminium, N connector.
LOG 1G LINK 600-1020 MHz, broadband gain 11 dB. Logarithmic. Aluminium, N connector. Max. power 50 W
LOG 1G PRO   High power 600-1020 MHz logarithmic antenna, broadband, gain 11.5 dB. Max. power 100 W. Aluminium, N connector.
LOG 1,5G LINK 1-1.6 MHz, broadband, gain 12 dB. Logarithmic. Aluminium, N connector. Max. power 25 W
LOG 013 1G   130 MHz-1Ghz, gain 6 dBd, broadband. Logarithmic, Aluminium, N connector. Max. power 25 W
LOG 008 1.3G   87 MHz-1.3 GHz, gain 5 dB, broadband. Logarithmic. Aluminium, N connector. Max. power 25 W
PAR 0.6 G LINK 830-1020 MHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 13 dB. Input connector: N. Illuminator, support with H/V micrometric adjustment, mounting clamps and stainless steel accessories included.
PAR 1.0 G LINK As above with 100 cm diameter and gain 17 dB.
PAR 1.2 G LINK As above with 120 cm diameter and gain 18 dB.
PAR 1.5 G LINK As above with 150 cm diameter and gain 20 dB.
PAR 1.8 G LINK As above with 180 cm diameter and gain 22 dB.
LOG 1.8 G LINK 1.65-1.8 GHz, gain 12.4 dB, broadband.
LOG 1.8 GR LINK 1.65-1.8 GHz, gain 12.4 dB, broadband, waterproof radome included.
LOG 2.5 G LINK 1.8-2.5 GHz, gain 12.8 dB, broadband.
LOG 2.5 GR LINK 1.8-2.5 GHz, gain 12.8 dB, broadband, waterproof radome included.
PAR 0.6 2G LINK 1.1-2.7 GHz parabolic antenna.0,6 mt diameter aluminium dish. Gain at center frequency: 18.5 dB. Input connector: N. Illuminator, support with H/V micrometric adjustment, mounting clamps and stainless steel accessories included.
PAR 1.0 2G LINK As above with 100 cm diameter and gain 22 dB.
PAR 1.2 2G LINK As above with 120 cm diameter and gain 24 dB.
PAR 1.5 2G LINK As above with 150 cm diameter and gain 27 dB.
PAR 1.8 2G LINK As above with 180 cm diameter and gain 28 dB.
PAR 0.6 8G LINK 5.6-9.9 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 31 dB. Input connector: N. Illuminator, support with H/V micrometric adjustment, mounting clamps and stainless steel accessories included.
PAR 1.0 8G LINK As above with 100 cm diameter and gain 36 dB.
PAR 1.2 8G LINK As above with 120 cm diameter and gain 38 dB.
PAR 1.5 8G LINK As above with 150 cm diameter and gain 40 dB.
PAR 1.8 8G LINK As above with 180 cm diameter and gain 41 dB.
PAR 0.6 10G LINK 10.1-12.7 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 32 dB. Input connector: N. Illuminator, support with H/V micrometric adjustment, mounting clamps and stainless steel accessories included.
PAR 1.0 10G LINK As above with 100 cm diameter and gain 37 dB.
PAR 1.2 10G LINK As above with 120 cm diameter and gain 39 dB.
PAR 1.5 10G LINK As above with 150 cm diameter and gain 41 dB.
PAR 1.8 10G LINK As above with 180 cm diameter and gain 42 dB.
PAR 0.6 14G LINK 12.8-14.9 GHz parabolic antenna. 60 cm diameter aluminium dish. Gain at center frequency: 32 dB. Input connector: N. Illuminator, support with H/V micrometric adjustment, mounting clamps and stainless steel accessories included.
PAR 1.0 14G LINK As above with 100 cm diameter and gain 37 dB.
PAR 1.2 14G LINK As above with 120 cm diameter and gain 39 dB.
PAR 1.5 14G LINK As above with 150 cm diameter and gain 41 dB.
PAR 1.8 14G LINK As above with 180 cm diameter and gain 42 dB.
Options for Microwave Parabolic Antennas
CODE

INFO

DESCRIPTION

RAD 0.6   Fiberglass radome for PAR06.
RAD 1.0   Fiberglass radome for PAR1.
RAD 1.2   Fiberglass radome for PAR1.2.
RAD 1.5   Fiberglass radome for PAR1.5.
RAD 1.8   Fiberglass radome for PAR1.8.


TRANSMITTING ANTENNAS
CODE

INFO

DESCRIPTION

   

Free computerized antenna design, null filling, beam tilt and coverage area and pattern optimization are available on request. For further information, please contact ITEL's Technical Dpt. at the phone ++ 39 0434 997667 or through Internet: www.itelcast.com and itel.tech@itelcast.com

Omnidirectional Dipoles - Vertical/Horizontal polarization
CODE

INFO

DESCRIPTION

FD 1EL LINK Aluminium omnidirectional dipole, 12 MHz band, gain 2.15 dB, N connector. Mounting clamps included.
FD 1BB N LINK Anticorodal omnidirectional dipole, 87.5-108 MHz broadband, 2.15 dB gain. N connector. Includes mounting clamps and stainless steel accessories.
FD 1BB LC LINK Like FD 1BB N, with LC connector.
FD 1BB 7/16 LINK "Like FD 1BB N, with 7/16" connector."
FD 1BB 7/8 LINK "Like FD 1BB N, with 7/8" connector."
FD 1XBB N LINK Like FD 1BB N, entirely stainless steel.
FD 1XBB LC LINK Like FD 1BB LC, entirely stainless steel.
FD 1XBB 7/16 LINK Like FD 1BB 7/16, entirely stainless steel.
FD 1XBB 7/8 LINK Like FD 1BB 7/8, entirely stainless steel.
Omnidirectional - Circular polarization
CODE

INFO

DESCRIPTION

FH 1C-BB N LINK CIRCULAR polarization omnidirectional antenna. 3 MHz band, gain -1.5 dB, N connector. Entirely stainless steel. Mounting Clamps and accessories included.
FD 2C-BB N LINK "CIRCULAR polarization omnidirectional antenna. Broadband, gain -1.5 dB, 7/16" connector. Stainless steel. Mounting clamps and accessories included. Enterely detachable to reduce volume and shipping cost."
FD 2C-BB 7/8 LINK "Like FD 2C - BB 716 with EIA 7/8" input connector. "
Directives - Vertical/Horizontal polarization
CODE

INFO

DESCRIPTION

FY 2EL LINK Aluminium 2-elements antenna, 4 MHz band, gain 4.2 dB, N connector. Mounting clamps included.
FY 3EL LINK Aluminium 3-elements Yagi, 12 MHz band, gain 6.8 dB, N connector. Mounting clamps included.
FY 4EL LINK Aluminium 4-elements Yagi, 12 MHz band, gain 7.8 dB, N connector. Mounting clamps included.
FL 4BB N LINK Aluminum 5-elements logarithmic. 86 - 110 MHz, broadband. Gain:5.5 dB. Power capability: 400 W. N connector, Mounting Clamps.
FY 3BB N LINK Anticorodal 3-elements Yagi, 87.5-108 MHz broadband, 6.8 dB gain. N connector. Mounting clamps and stainless steel accessories.
FY 3BB LC LINK Like FY 3BB N, with LC connector.
FY 3BB 7/16 LINK "Like FY 3BB N, with 7/16" connector."
FY 3BB 7/8 LINK "Like FY 3BB N, with 7/8" connector."
FY 3XBB N LINK Like FY 3BB N, entirely stainless steel.
FY 3XBB LC LINK Like FY 3BB KC, entirely stainless steel.
FY 3XBB 7/16 LINK Like P3 7/16, entirely stainless steel.
FY 3XBB 7/8 LINK Like P3 7/8, entirely stainless steel.
FP BB 7/16 LINK "Panel antenna, 7,5 dB gain, EIA 7/16" connector."
FP BB 7/8 LINK "Panel antenna, 7,5 dB gain, EIA 7/8" connector."


ANTENNA SPLITTERS
CODE

INFO

DESCRIPTION

FAS2 N-N LINK 2-way splitter, broadband, N connectors, max. power 600W.
FAS3 N-N LINK 3-way splitter, broadband, N connectors, max. power 600W.
FAS4 N-N LINK 4-way splitter, broadband, N connectors, max. power 600W.
FAS6 NB N-N LINK 6-way splitter, 10 MHz bandwidth, N connectors, max. power 600W.
FAS6 N-N LINK 6-way splitter, broadband, N connectors, max. power 600W.
FAS8 NB N-N LINK 8-way splitter, 8 MHz bandwidth, N connectors, max. power 600W.
FAS8 N-N LINK 8-way splitter, broadband, N connectors, max. power 600W.
FAS2 716-N LINK "2-way splitter, broadband, 7/16"-N connectors, max. power 1200W."
FAS3 716-N LINK "3-way splitter, broadband, 7/16"-N connectors, max. power 1500W."
FAS4 716-N LINK "4-way splitter, broadband, 7/16"-N connectors, max. power 1500W."
FAS6 NB 716-N LINK "6-way splitter, 10 MHz bandwidth, 7/16"-N connectors, max. power 1500W."
FAS6 716-N LINK "6-way splitter, broadband, 7/16"-N connectors, max. power 1500W."
FAS8 NB 716-N LINK "8-way splitter, 8 MHz bandwidth, 7/16"-N connectors, max. power 1500W."
FAS8 716-N LINK "8-way splitter, broadband, 7/16"-N connectors, max. power 1500W."
FAS2 78-N LINK "2-way splitter, broadband, 7/8"-N connectors, max. power 1200W."
FAS3 78-N LINK "3-way splitter, broadband, 7/8"-N connectors, max. power 1800W."
FAS4 78-N LINK "4-way splitter, broadband, 7/8"-N connectors, max. power 2400W."
FAS6 NB 78-N LINK "6-way splitter, 10 MHz bandwidth, 7/8"-N connectors, max. power 3600W."
FAS6 78-N LINK "6-way splitter, broadband, 7/8"-N connectors, max. power 3600W."
FAS6 NB 78-N LINK "8-way splitter, 8 MHz bandwidth, 7/8"-N connectors, max. power 5000W."
FAS8 78-N LINK "8-way splitter, broadband, 7/8"-N connectors, max. power 5000W."
FAS2 716-716 LINK "2-way splitter, broadband, 7/16"-7/16" connectors, max. power 1500W."
FAS3 716-716 LINK "3-way splitter, broadband, 7/16"-7/16" connectors, max. power 1500W."
FAS4 716-716 LINK "4-way splitter, broadband, 7/16"-7/16" connectors, max. power 1500W."
FAS6 NB 716-716 LINK "6-way splitter, 10 MHz bandwidth, 7/16"-7/16" connectors, max. power 1500W."
FAS6 716-716 LINK "6-way splitter, broadband, 7/16"-7/16" connectors, max. power 1500W."
FAS8 NB 716-716 LINK "8-way splitter, 8 MHz bandwidth, 7/16"-7/16" connectors, max. power 1500W."
FAS8 78-716 LINK "8-way splitter, broadband, 7/16"-7/16" connectors, max. power 1500W."
FAS2 78-716 LINK "2-way splitter, broadband, 7/8"-7/16 connectors, max. power 2800W."
FAS3 78-716 LINK "3-way splitter, broadband, 7/8"-7/16 connectors, max. power 4200W."
FAS4 78-716 LINK "4-way splitter, broadband, 7/8"-7/16 connectors, max. power 5000W."
FAS6 NB 78-716 LINK "6-way splitter, 10 MHz bandwidth, 7/8"-7/16" connectors, max. power 5000W."
FAS8 NB 78-716 LINK "6-way splitter, broadband, 7/8"-7/16" connectors, max. power 5000W."
FAS8 NB 78-716 LINK "8-way splitter, 8 MHz bandwidth, 7/8"-7/16" connectors, max. power 5000W."
FAS8 78-716 LINK "8-way splitter, broadband, 7/8"-7/16" connectors, max. power 5000W."
FAS4 158-716 LINK "4-way splitter, broadband, 1+5/8"-7/16" connectors, max. power 5500W."
FAS6 NB 158-716 LINK "6-way splitter, 10 MHz bandwidth, 1+5/8"-7/16" connectors, max. power 8000W."
FAS6 158-716 LINK "6-way splitter, broadband, 1+5/8"-7/16" connectors, max. power 8000W."
FAS8 NB 158-716 LINK "8-way splitter, 8 MHz bandwidth, 1+5/8"-7/16" connectors, max. power 11000W."
FAS8 158-716 LINK "8-way splitter, broadband, 1+5/8"-7/16" connectors, max. power 11000W."
FAS2 78-78 LINK "2-way splitter, broadband, 7/8"-7/8" connectors, max. power 5000W."
FAS3 78-78 LINK "3-way splitter, broadband, 7/8"-7/8" connectors, max. power 5000W."
FAS4 78-78 LINK "4-way splitter, broadband, 7/8"-7/8" connectors, max. power 5000W."
FAS6 NB 78-78 LINK "6-way splitter, 10 MHz bandwidth, 7/8"-7/8" connectors, max. power 5000W."
FAS6 78-78 LINK "6-way splitter, broadband, 7/8"-7/8" connectors, max. power 5000W."
FAS8 NB 78-78 LINK "8-way splitter, 8 MHz bandwidth, 7/8"-7/8" connectors, max. power 5000W."
FAS8 158-78 LINK "8-way splitter, broadband, 7/8"-7/8" connectors, max. power 5000W."
FAS3 158-78 LINK "2-way splitter, broadband, 1+5/8"-7/8" connectors, max. power 10000W."
FAS4 158-78 LINK "3-way splitter, broadband, 1+5/8"-7/8" connectors, max. power 14000W."
FAS6NB 158-78 LINK "4-way splitter, broadband, 1+5/8"-7/8" connectors, max. power 14000W."
FAS6 158-78 LINK "6-way splitter, 10 MHz bandwidth, 1+5/8"-7/8" connectors, max. power 14000W."
FAS8 158-78 LINK "6-way splitter, broadband, 1+5/8"-7/8" connectors, max. power 14000W."
FAS8 NB 158-78 LINK "8-way splitter, 8 MHz bandwidth, 1+5/8"-7/8" connectors, max. power 14000W."
FAS8 158-78 LINK "8-way splitter, broadband, 1+5/8"-7/8" connectors, max. power 14000W."
FAS4 318-78 LINK "4-way splitter, broadband, 3+1/8"-7/8" connectors, max. power 20000W."
FAS6 NB 318-78 LINK "6-way splitter, 10 MHz bandwidth, 3+1/8"-7/8" connectors, max. power 25000W."
FAS6 318-78 LINK "6-way splitter, broadband, 3+1/8"-7/8" connectors, max. power 25000W."
FAS8 NB 318-78 LINK "8-way splitter, 8 MHz bandwidth, 3+1/8"-7/8" connectors, max. power 25000W."
FAS8 318-78 LINK "8-way splitter, broadband, 3+1/8"-7/8" connectors, max. power 25000W."
FAS2 158-158 LINK "2-way splitter, broadband, 1+5/8"-1+5/8" connectors, max. power 14000W."
FAS3 158-158 LINK "3-way splitter, broadband, 1+5/8"-1+5/8" connectors, max. power 14000W."
FAS4 318-158 LINK "4-way splitter, broadband, 1+5/8"-1+5/8" connectors, max. power 14000W."
FAS2 318-158 LINK "2-way splitter, broadband, 3+1/8"-1+5/8" connectors, max. power 25000W."
FAS3 318-158 LINK "3-way splitter, broadband, 3+1/8"-1+5/8" connectors, max. power 25000W."
FAS4 318-318 LINK "4-way splitter, broadband, 3+1/8"-1+5/8" connectors, max. power 25000W."
FAS2 318-318 LINK "2-way splitter, broadband, 3+1/8"-3+1/8" connectors, max. power 25000W."


CABLE FOR ANTENNA SYSTEMS
CODE

INFO

DESCRIPTION

   

All the below coupling cables are optimized for standard stacked-arrays antenna systems with vertical polarization. For other array systems or customized patterns please contact our Technical Dpt. (e-mail: itel.tech@itelcast.com)

CAV 2   Coupling cable for antenna system. RG 213/50 W, N connector, 2 mt.
CAV 3   Coupling cable for 2 bays antenna system. RG 213/50 W, N connector, 3 mt.
CAV 5,5   Coupling cable for 4 bays antenna system. RG 213/50 W, N connector, 5,5 mt.
CAV 7,5   Coupling cable for 6 bays antenna system. RG 213/50 W, N connector, 7,5 mt.
CAV 9,5   Coupling cable for 8 bays antenna system. RG 213/50 W, N connector, 9,5 mt.
CAV 2 1/4 N   "Coupling cable for antenna system. Cellflex 1/4"/50 W, N connector, 2 mt."
CAV 3 1/4 N   "Coupling cable for 2 bays antenna system. Cellflex 1/4"/50 W, N connector, 3 mt."
CAV 5,5 1/4 N   "Coupling cable for 4 bays antenna system. Cellflex 1/4"/50 W, N connector, 5,5 mt."
CAV 7,5 1/4 N   "Coupling cable for 6 bays antenna system. Cellflex 1/4"/50 W, N connector, 7,5 mt."
CAV 9,5 1/4 N   "Coupling cable for 8 bays antenna system. Cellflex 1/4"/50 W, N connector, 9,5 mt."
CAV 2 1/2 N   "Coupling cable for antenna system. Cellflex 1/2"/50 W, N connector 2 mt. "
CAV 3 1/2 N   "Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, N connector 3 mt. "
CAV 5,5 1/2 N   "Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, N connector, 5,5 mt."
CAV 7,5 1/2 N   "Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, N connector, 7,5 mt."
CAV 9,5 1/2 N   "Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, N connector, 9,5 mt."
CAV 2 1/2 LC   "Coupling cable for antenna system. Cellflex 1/2"/50 W, LC connector, 2 mt."
CAV 3 1/2 LC   "Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, LC connector, 3 mt."
CAV 5,5 1/2 LC   "Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, LC connector, 5,5 mt."
CAV 7,5 1/2 LC   "Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, LC connector, 7,5 mt."
CAV 9,5 1/2 LC   "Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, LC connector, 9,5 mt."
CAV 2 1/2 7/16   "Coupling cable for antenna system. Cellflex 1/2"/50 W, EIA 7/16" conn., 2 mt."
CAV 3 1/2 7/16   "Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" conn., 3 mt."
CAV 5,5 1/27/16   "Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16" conn. 5,5 mt."
CAV 7,5 1/27/16   "Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16"conn., 7,5 mt."
CAV 9,5 1/27/16   "Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, EIA 7/16"conn., 9,5 mt."
CAV 2 1/2 7/8   "Coupling cable for antenna system. Cellflex 1/2"/50 W, EIA 7/8" conn., 2 mt."
CAV 3 1/2 7/8   "Coupling cable for 2 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" conn., 3 mt."
CAV 5,5 1/2 7/8   "Coupling cable for 4 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" conn., 5,5 mt."
CAV 7,5 1/2 7/8   "Coupling cable for 6 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" conn., 7,5 mt."
CAV 9,5 1/2 7/8   "Coupling cable for 8 bays antenna system. Cellflex 1/2"/50 W, EIA 7/8" conn., 9,5 mt."
CAV 2 7/8 7/8   "Coupling cable for antenna system. Cellflex 7/8", EIA 7/8" conn., 2 mt."
CAV 3 7/8 7/8   "Coupling cable for 2 bays antenna system. Cellflex 7/8", EIA 7/8" conn., 3 mt."
CAV 5,5 7/8 7/8   "Coupling cable for 4 bays antenna system. Cellflex 7/8", EIA 7/8" conn., 5,5 mt."
CAV 7,5 7/8 7/8   "Coupling cable for 6 bays antenna system. Cellflex 7/8", EIA 7/8" conn., 7,5 mt."
CAV 9,5 7/8 7/8   "Coupling cable for 8 bays antenna system. Cellflex 7/8", EIA 7/8" conn., 9,5 mt."
CAV 2 158-158   "Coupling cable for antenna system. Cellflex 1+5/8", EIA 1+5/8" conn., 2 mt."
CAV 3 158-158   "Coupling cable for 2 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" conn., 3 mt."
CAV 5,5 158-158   "Coupling cable for 4 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" conn., 5,5 mt."
CAV 7,5 158-158   "Coupling cable for 6 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" conn., 7,5 mt."
CAV 9,5 158-158   "Coupling cable for 8 bays antenna system. Cellflex 1+5/8", EIA 1+5/8" conn., 9,5 mt."


EXAMPLE ANTENNA SYSTEMS
CODE

INFO

DESCRIPTION

   

Further antenna systems, with customized patterns, different electrical features and construction materials, are available upon request ( itel.info@itelcast.com ).

Omnidirectional, vertical polarization, up to 600 W
CODE

INFO

DESCRIPTION

2FD1EL/N LINK Antenna system composed by: 2 x D1 LB dipoles, 1 x ACS2 N splitter, 2 x CAV 3 connecting cables. Maximum power 600 W.
4FD1EL/N LINK Antenna system composed by: 4 x D1 LB dipoles, 1 x ACS4 N splitter, 4 x CAV 5.5 connecting cables. Maximum power 600 W.
6FD1EL/N LINK Antenna system composed by: 6 x D1 LB dipoles, 1 x ACS6 N splitter, 6 x CAV 7.5 connecting cables. Maximum power 600 W.
Omnidirectional, vertical polarization, up to 5 kW
CODE

INFO

DESCRIPTION

2FD1BB/716/78 LINK Antenna system composed by: 2 x P1 7/16 dipoles, 1 x ACS2 78-716 splitter, 2 x CAV 3 1/2 7/16 connecting cables. Maximum power 3 kW.
4FD1BB/716/78 LINK Antenna system composed by: 4 x P1 7/16 dipoles, 1 x ACS4 78-716 splitter, 4 x CAV 5.5 1/2 7/16 connecting cables. Maximum power 5 kW.
6FD1BB/716/78 LINK Antenna system composed by: 6 x P1 7/16 dipoles, 1 x ACS6 78-716 splitter, 6 x CAV 7.5 1/2 7/16 connecting cables. Maximum power 5 kW.
8FD1BB/716/78 LINK Antenna system composed by: 8 x P1 7/16 dipoles, 1 x ACS8 78-716 splitter, 8 x CAV 9.5 1/2 7/16 connecting cables. Maximum power 5 kW.
Omnidirectional, vertical polarization, up to 14 kW
CODE

INFO

DESCRIPTION

2FD1BB/78/158 LINK Antenna system composed by: 2 x P1 7/8 dipoles, 1 x ACS2 158-78 splitter, 2 x CAV 3 7/8 7/8 connecting cables. Maximum power 10 kW.
4FD1BB/78/158 LINK Antenna system composed by: 4 x P1 7/8 dipoles, 1 x ACS4 158-78 splitter, 4 x CAV 5.5 7/8 7/8 connecting cables. Maximum power 14 kW.
6FD1BB/78/158 LINK Antenna system composed by: 6 x P1 7/8 dipoles, 1 x ACS6 158-78 splitter, 6 x CAV 7.5 7/8 7/8 connecting cables. Maximum power 14 kW.
8FD1BB/78/158 LINK Antenna system composed by: 8 x P1 7/8 dipoles, 1 x ACS8 158-78 splitter, 8 x CAV 9.5 7/8 7/8 connecting cables. Maximum power 14 kW.
Omnidirectional, vertical polarization, up to 24 kW
CODE

INFO

DESCRIPTION

6FD1BB/78/158 LINK Antenna system composed by: 6 x P1 7/8 dipoles, 1 x ACS6 318-78 splitter, 6 x CAV 7.5 7/8 7/8 connecting cables. Maximum power 15 kW.
8FD1BB/78/158 LINK Antenna system composed by: 8 x P1 7/8 dipoles, 1 x ACS8 318-78 splitter, 8 x CAV 9.5 7/8 7/8 connecting cables. Maximum power 25 kW.
Omnidirectional, circular polarization, up to 1.2 kW
CODE

INFO

DESCRIPTION

2 FH 1C-BB N LINK Antenna system composed by: 2 x SC/N antennas, 1 x ACS2 N splitter, 2 x CAV 3 connecting cables. Maximum power 600 W.
4 FH 1C-BB N LINK Antenna system composed by: 4 x SC/N antennas, 1 x ACS4 N splitter, 4 x CAV 5.5 connecting cables. Maximum power 600 W.
6 FH 1C-BB N LINK Antenna system composed by: 6 x SC/N antennas, 1 x ACS6 716-Nsplitter, 6 x CAV 7.5 connecting cables. Maximum power 1.2 kW.
8 FH 1C-BB N LINK Antenna system composed by: 8 x SC/N antennas, 1 x ACS8 716-N splitter, 8 x CAV 9.5 connecting cables. Maximum power 1.2 kW.
Omnidirectional, circular polarization, up to 5 kW
CODE

INFO

DESCRIPTION

2FD2C/716/78 LINK Antenna system composed by: 2 x OCS 716 dipoles, 1 x ACS2 78-716 splitter, 2 x CAV 3 1/2 7/16 connecting cables. Maximum power 3 kW.
4FD2C/716/78 LINK Antenna system composed by: 4 x OCS 716 antennas, 1 x ACS4 78-716 splitter, 4 x CAV 5.5 1/2 7/16 connecting cables. Maximum power 5 kW.
6FD2C/716/78 LINK Antenna system composed by: 6 x OCS 716 antennas, 1 x ACS6 78-716 splitter, 6 x CAV 7.5 1/2 7/16 connecting cables. Maximum power 5 kW.
8FD2C/716/78 LINK Antenna system composed by: 8 x OCS 716 antennas, 1 x ACS8 78-716 splitter, 8 x CAV 9.5 1/2 7/16 connecting cables. Maximum power 5 kW.
Omnidirectional, circular polarization, up to 14 kW
CODE

INFO

DESCRIPTION

2FD2C/78/158 LINK Antenna system composed by: 2 x OCS 78 antennas, 1 x ACS2 158-78 splitter, 2 x CAV 3 7/8 7/8 connecting cables. Maximum power 10 kW.
4FD2C/78/158 LINK Antenna system composed by: 4 x OCS 78 antennas, 1 x ACS4 158-78 splitter, 4 x CAV 5.5 7/8 7/8 connecting cables. Maximum power 14 kW.
6FD2C/78/158 LINK Antenna system composed by: 6 x OCS 78 antennas, 1 x ACS6 158-78 splitter, 6 x CAV 7.5 7/8 7/8 connecting cables. Maximum power 14 kW.
8FD2C/78/158 LINK Antenna system composed by: 8 x OCS 78 antennas, 1 x ACS8 158-78 splitter, 8 x CAV 9.5 7/8 7/8 connecting cables. Maximum power 14 kW.
Omnidirectional, circular polarization, up to 25 kW
CODE

INFO

DESCRIPTION

6FD2C/78/318 LINK Antenna system composed by: 6 x OCS 78 antennas, 1 x ACS6 318-78 splitter, 6 x CAV 7.5 7/8 7/8 connecting cables. Maximum power 15 kW.
8FD2C/78/318 LINK Antenna system composed by: 8 x OCS 78 antennas, 1 x ACS8 318-78 splitter, 8 x CAV 9.5 7/8 7/8 connecting cables. Maximum power 25 kW.
Directive, vertical polarization, up to 600 W
CODE

INFO

DESCRIPTION

2FY 3EL/N LINK Antenna system composed by: 2 x D3 LB directive antennas, 1 x ACS2 N splitter, 2 x CAV 3 connecting cables. Maximum power 600 W.
4FY 3EL/N LINK Antenna system composed by: 4 x D3 LB directive antennas, 1 x ACS4 N splitter, 4 x CAV 5.5 connecting cables. Maximum power 600 W.
6FY 3EL/N LINK Antenna system composed by: 6 x D3 LB directive antennas, 1 x ACS6 splitter, 6 x CAV 7.5 connecting cables. Maximum power 600 W.
Directive, vertical polarization, up to 5 kW
CODE

INFO

DESCRIPTION

2FY3/716/78 LINK Antenna system composed by: 2 x P3 7/16 directive antennas, 1 x ACS2 78-716 splitter, 2 x CAV 3 1/2 7/16 connecting cables. Maximum power 2.4 kW.
4FY3/716/78 LINK Antenna system composed by: 4 x P3 7/16 directive antennas, 1 x ACS4 78-716 splitter, 4 x CAV 5.5 1/2 7/16 connecting cables. Maximum power 5 kW.
6FY3/716/78 LINK Antenna system composed by: 6 x P3 7/16 directive antennas, 1 x ACS6 78-716 splitter, 6 x CAV 7.5 1/2 7/16 connecting cables. Maximum power 5 kW.
8FY3/716/78 LINK Antenna system composed by: 8 x P3 7/16 directive antennas, 1 x ACS8 78-716 splitter, 8 x CAV 9.5 1/2 7/16 connecting cables. Maximum power 5 kW.
Directive, vertical polarization, up to 14 kW
CODE

INFO

DESCRIPTION

2FY3/78/158 LINK Antenna system composed by: 2 x P3 7/8 directive antennas, 1 x ACS2 158-78 splitter, 2 x CAV 3 7/8 7/8 connecting cables. Maximum power 5 kW.
4FY3/78/158 LINK Antenna system composed by: 4 x P3 7/8 directive antennas, 1 x ACS4 158-78 splitter, 4 x CAV 5.5 7/8 7/8 connecting cables. Maximum power 14 kW.
6FY3/78/158 LINK Antenna system composed by: 6 x P3 7/8 directive antennas, 1 x ACS6 158-78 splitter, 6 x CAV 7.5 7/8 7/8 connecting cables. Maximum power 14 kW.
8FY3/78/158 LINK Antenna system composed by: 8 x P3 7/8 v, 1 x ACS8 158-78 splitter, 8 x CAV 9.5 7/8 7/8 connecting cables. Maximum power 14 kW.
Directive, vertical polarization, up to 25 kW
CODE

INFO

DESCRIPTION

6FY3/78/158 LINK Antenna system composed by: 6 x P3 7/8 directive antennas, 1 x ACS6 318-78 splitter, 6 x CAV 7.5 7/8 7/8 connecting cables. Maximum power 15 kW.
8FY3/78/158 LINK Antenna system composed by: 8 x P3 7/8 directive antennas, 1 x ACS8 318-78 splitter, 8 x CAV 9.5 7/8 7/8 connecting cables. Maximum power 25 kW.


FILTERS
CODE

INFO

DESCRIPTION

FLP 250   250 W max, N conn., 2nd harmonic atten. > 62 dB, insert. losses < 0.2 dB.
FLP 1500   800 W max, N conn., 2nd harmonic atten. > 62 dB, insert. losses < 0.15 dB.
FLP 3000   2500 W max, LC conn., 2nd harmonic atten. > 62 dB, insert. losses < 0.12 dB.
FLP 8000   "6500 W max, 7/8" conn., 2nd harmonic atten. > 62 dB, insert. losses < 0.12 dB."
NOTCH FILTERS
CODE

INFO

DESCRIPTION

FN 78   "2nd harm. stop filter (-68 dB), EIA 7/8" conn., 6 kW max, ins. losses < 0.1 dB. "
FN 158   "2nd harm. stop filter (-68 dB), EIA 1+5/8", 15 kW max, ins. losses < 0.1 dB. "
BAND PASS CAVITY FILTERS
CODE

INFO

DESCRIPTION

FC 2X500 LINK Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.12 dB. Max pwr: 0.5 kW. In/Out connectors: N (others upon request).
FC 2X1000 LINK Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 1 kW. In/Out connectors: LC (others upon request).
FC 2X2000 LINK "Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 2 kW. In/Out connectors: EIA 7/8" (others upon request)."
FC 2X5000 LINK "Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 5 kW. In/Out connectors: EIA 7/8" (others upon request)."
FC 2X10000 LINK "Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 10 kW. In/Out connectors: EIA 1 5/8" (others upon request)."
FC 2X20000 LINK "Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 20 kW. In/Out connectors: EIA 3 1/8" (others upon request)."
FC 2X30000 LINK "Two cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.10 dB. Max pwr: 30 kW. In/Out connectors: EIA 3 1/8" (others upon request)."
FC 3X500 LINK Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 0.5 kW. In/Out connectors: N (others upon request).
FC 3X1000 LINK Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 1 kW. In/Out connectors: LC (others upon request).
FC 3X2000 LINK "Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 2 kW. In/Out connectors: EIA 7/8" (others upon request)."
FC 3X5000 LINK "Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 5 kW. In/Out connectors: EIA 7/8" (others upon request)."
FC 3X10000 LINK "Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 10 kW. In/Out connectors: EIA 1 5/8" (others upon request)."
FC 3X20000 LINK "Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 20 kW. In/Out connectors: EIA 3 1/8" (others upon request)."
FC 3X30000 LINK "Three cavity highQ bandpass filter. 87.5-108 MHz. Insert. losses < 0.15 dB. Max pwr: 30 kW. In/Out connectors: EIA 3 1/8" (others upon request)."
FC 1x300   Single cavity highQ bandpass filter. 400-1000 MHz. Insert. losses < 0.18 dB. Max pwr: 300 W. In/Out connectors: N (others upon request).
COMBINING FILTERS ( 87.5 - 108 MHZ ) MORE TRANSMITTERS IN THE SAME ANTENNA - FM
CODE

INFO

DESCRIPTION

FCO S 2x800 LINK "Two transmitters selective combining filter. 3 dB couplers and cavity system. Max pwr 0.8+0.8 kW. Freq. spacing: > 2 MHz. In/out conn: LC-7/8"."
FCO S 2x2000 LINK "Two transmitters selective combining filter. 3 dB couplers and cavity system. Max pwr 2+2 kW. Freq. spacing: > 2 MHz. In/out conn: 7/8"."
FCO S 2x5000 LINK "Two transmitters selective combining filter. 3 dB couplers and cavity system. Max pwr 5+5 kW. Freq. spacing: > 2 MHz. In/out conn: 7/8"-1+5/8"."
FCO 2X500 LINK Two transmitters combining filter. Star point and cavity system. Max pwr 0.5+0.5 kW. Freq. spacing: > 2 MHz. In/out conn: N - LC.
FCO 2X1000 LINK "Two transmitters combining filter. Star point and cavity system. Max pwr 1+1 kW. Freq. spacing: > 2 MHz. In/out conn: LC - EIA 7/8" (others upon request)."
FCO 2X2000 LINK "Two transmitters combining filter. Star point and cavity system. Max pwr 2+2 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 7/8"."
FCO 2X5000 LINK "Two transmitters combining filter. Star point and cavity system. Max pwr 5+5 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 7/8" - EIA 1 5/8."
FCO 2X10000 LINK "Two transmitters combining filter. Star point and cavity system. Max pwr 10+10 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 1 5/8"."
FCO 2X20000 LINK "Two transmitters combining filter. Star point and cavity system. Max pwr 20+20 kW. Freq. spacing: > 2 MHz. In/out conn: EIA 3 1/8"."
FCO 2x30000 LINK "Two transmitters combining filter. Star point and cavity system. Max pwr 30+30 kW. Freq. spacing: > 2 MHz. Inputt conn: EIA 3 1/8"."
FCO 3X500 LINK Three transmitters combining filter. Star point and cavity system. Max pwr 3 x 0.5 kW. Freq. spacing: > 3 MHz. In/out conn: N - LC (others upon request).
FCO 3x1000 LINK "Three transmitters combining filter. Star point and cavity system. Max pwr 1+1+1 kW. Freq. spacing: > 3 MHz. In/out conn: LC - 7/8" (others upon request)."
FCO 3x2000 LINK "Three transmitters combining filter. Star point and cavity system. Max pwr 2+2+2 kW. Freq. spacing: > 3 MHz. In/out conn: EIA 7/8" - EIA 1 5/8"."
FCO 3x5000 LINK "Three transmitters combining filter. Star point and cavity system. Max pwr 5+5+5 kW. Freq. spacing: > 3 MHz. In/out conn: EIA 7/8" - EIA 1 5/8"."
FCO 3X10000 LINK "Three transmitters combining filter. Star point and cavity system. Max pwr 10+10+10 kW. Freq. spacing: > 3 MHz. In/out conn: EIA 1 5/8" - EIA 3 1/8"."
FCO 3X20000 LINK "Three transmitters combining filter. Star point and cavity system. Max pwr 20+20+20 kW. Freq. spacing: > 4 MHz. Input conn: EIA 3 1/8"."
FCO 3X30000 LINK "Three transmitters combining filter. Star point and cavity system. Max pwr 30+30+30 kW. Freq. spacing: > 4 MHz. Input conn: EIA 3 1/8"."
COMBINING FILTERS (400 - 1000 MHz) - UHF
CODE

INFO

DESCRIPTION

UCO 2x300 LINK Two transmitters combining filter. Star point and cavity system. Max pwr 300+300 W. Freq. spacing: > 16 MHz. In/out conn: N.
UCO 3x300 LINK Three transmitters combining filter. Star point and cavity system. Max pwr 300+300+300 W. Freq. spacing: > 18 MHz. In/out conn: N.
DIRECTIONAL COUPLERS
CODE

INFO

DESCRIPTION

FDC 1000   3 dB directional coupler. Max power for each gate: 1 kW. In/out conn.: LC.
FDC 2000   "3 dB directional coupler. Max power for each gate: 1.8 kW. In/out conn.: 7/8"."


VOLTAGE REGULATORS
CODE

INFO

DESCRIPTION

STM 2.5/E LINK Single-phase regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 2,5 kVA.
STM 5/E LINK As above with 5 kVA.
STM 7/E LINK As above with 7 kVA.
STM 15/E LINK As above with 15 kVA.
STM 20/E LINK As above with 20 kVA.
STM 35/E LINK As above with 35 kVA.
STM 50/E LINK As above with 50 kVA.
STT 5/E LINK Three-phases voltage regulat. (voltage regulation done on the average value of the 3 phases) Vin: 380±25% Vac, Vout: 380±2% Vac. 5 kVA.
STT 10/E LINK As above with 10 kVA.
STT 15/E LINK As above with 15 kVA.
STT 20/E LINK As above with 20 kVA.
STT 30/E LINK As above with 35 kVA.
STT 50/E LINK as above with 50 kVA.
STT 75/E LINK As above with 75 kVA.
STY 5/E LINK Three-phases voltage regulat.(voltage regulation done in each phase indipendently) Vin: 380±25% Vac, Vout: 380±2% Vac. 5 kVA.
STY 10/E LINK As above with 10 kVA.
STY 15/E LINK As above with 15 kVA.
STY 20/E LINK As above with 20 kVA.
STY 30/E LINK As above with 30 kVA.
STY 50/E LINK As above with 50 kVA.
STY 75/E LINK As above with 75 kVA.
Statics
CODE

INFO

DESCRIPTION

SSM/05   Single-phase static voltage regulat. Vin: 220±15% Vac, Vout: 220±3% Vac. 500 VA.
SSM/10   As above with 1 kVA.
SSM/20   As above with 2 kVA.
SSM/40   As above with 4 kVA.


PROTECTION SYSTEMS
CODE

INFO

DESCRIPTION

   

In order to prevent transmitters' power supplies damages caused by mains surges or lightning, it's recommended to use a surge voltage or/and lightning protector better if coupled with an insulation transformer installed immediately down-line of the mains entrance or before the transmitter to be protected.

LP/22   110/220/240 Vac single-phase ligtning protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.
LP/38   220/380/415 Vac three-phase ligtning protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.
SA/22M   110/220/240 Vac single-phase surge voltage protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.
SA/38T   220/380/415 Vac three-phase surge voltage protector to be installed inside the transmitter cabinet or immediately down-line of the mains entrance.
Insulation Transformers
CODE

INFO

DESCRIPTION

TSM05/11   Insulation transformer, 110/110 Vac single-phase, 500 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TSM05/22   As above with 220/220 or 240/240 Vac.
TSM10/11   Insulation transformer, 110/110 Vac single-phase, 1000 VA, 15 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TSM10/22   As above with 220/220 or 240/240 Vac.
TSM20/11   Insulation transformer, 110/110 Vac single-phase, 2 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TSM20/22   As above with 220/220 or 240/240 Vac.
TSM30/11   Insulation transformer, 110/110 Vac single-phase, 3 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TSM30/22   As above with 220/220 or 240/240 Vac.
TSM50/11   Insulation transformer, 110/110 Vac single-phase, 5 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TSM50/22   As above with 220/220 or 240/240 Vac.
TSM100/11   Insulation transformer, 110/110 Vac single-phase, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TSM100/22   As above with 220/220 or 240/240 Vac.
TST80/22   Insulation transformer, 220/220 or 240/240 Vac three-phase, 8 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TST80/38   As above with 380/380 or 415/415 Vac.
TST100/22   Insulation transformer, 220/220 or 240/240 Vac three-phase, 10 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TST100/38   As above with 380/380 or 415/415 Vac.
TST150/22   Insulation transformer, 220/220 or 240/240 Vac three-phase, 15 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TST150/38   As above with 380/380 or 415/415 Vac.
TST200/22   Insulation transformer, 220/220 or 240/240 Vac three-phase, 20 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TST200/38   As above with 380/380 or 415/415 Vac.
TST300/22   Insulation transformer, 220/220 or 240/240 Vac three-phase, 30 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TST300/38   As above with 380/380 or 415/415 Vac.
TST400/22   Insulation transformer, 220/220 or 240/240 Vac three-phase, 40 kVA, 25 kV insulation between primary/secondary/ground. Includes ground screen between the windings.
TST400/38   As above with 380/380 or 415/415 Vac.
Cabinets for surge and lightning protection systems
CODE

INFO

DESCRIPTION

   

he following cabinets are made to be placed under the transmitter or immediately down-line of the mains entrance.

CSL/03   Standard cabinet to contain surge voltage or/and lightning protectors and insulation transformer up to 3 kVA.
CSL/05   As above up to 5 kVA.
CSL/15   As above up to 15 kVA.
CSL/30   As above up to 30 kVA.
CSL/40   As above up to 40 kVA.


ACCESSORIES
CODE

INFO

DESCRIPTION

   

RF coaxial cables, rigid coaxial lines, waveguide, connectors, adaptors, dehydrators, pressurizations accessories, towers and connected accessories, automatic switch-over units, patch panels, manual or automatic coaxial switchers, equipment shelters, lightning surge protectors, mains separator, remote controls, transmitting tubes, RF transistors & mosfet, dummy loads.....

   

Prices, features and specifications subjet to change without notice.

   

24-hours worldwide delivery service