TAU 10000T
5000 W , III/IV/V band TV tube amplifier
 
 


Itel Broadcast

 
     
 
  • General. The cavity tube power amplifiers TAV & TAU series are designed to operate on IV/V Band (TAU 5000) and III Band ( TAV 5000) as linear amplifiers to combined vision/sound transmission.
  • 5000 W output power continous ratin are guaranteed by redoundancy of all parts of this series amplifiers.
  • 175 W exciting are necessary to obta full output power.
  • High efficiency cavities employed a used by the most important world-wide producers and tested by many functioning years on the major broadcasting stations. These cavities are the best to strenght, reliability, parameters constancy along the time.
  • Long life tube. Siemens tetrodes RS 2022CL (TAV 5000T) and RS 1034 (TAU 5000T) are used with reduce power,- this guarantees a long average life also in not ideal conditions.
  • Notch filters available with many ca ties and several configurations, guarantee spectral clearness over international standards limits (CCIR/FCC/DOC).
  • Electronic protections assure a affordable and stable operation protecting units against major fault conditions.
  • Internal logic control unit and interface gates with driving stages are compatible with major international standards.
  • Operator's safety is protected by active and passive devices according to international standards.
  • A multipurpose instrument on the front pannel allows the operator to monitor the main operation parameters.
  • Forced air cooling. An overdimensioned centrifugal fan and a regenerable a filter, guarantee amplifier regular functioning even with hard climatic and ambiental conditions.
  • Meets or exceeds international standards for safety and electrical specifications.
 
 
     
 
 
TAU 10000T
5000 W , III/IV/V band TV tube amplifier
 
     
 

 

General
Frequency range :
Mod. TAV 5000T = 162...230 MHz
Mod. TAU 5000T = 470...860 MHz
Input power 175W
Vision output power 5 kw sync. peack
Sound output power 0.5 kw RMS
Vision-sound ratio 10 or 13 dB
Dual-sound operation 13/20 dB
Bandwidth >= 10 MHz/-1 dB

RF Characteristics
RF input connector 7/16"
RF output connector 1 5/8"
In-out impedance 50 W
Input return loss > 20 dB
Intermodulation withoutpre-equalizzation <= 54 dB
Differential gain <=10%
Differential phase <=±3%
Tilt 50 Hz <= ±2 %
Video noise, hum >= 43 dB pp

Compatible notch filters
Three cavities TNF 3/65
Six cavities   TNF 6/65
Nine cavities  TNF 9/65

Mains
3 Phase mains 3N 380/220 V 
permissible voltage variation ±1%
frequency 47 to 63 Hz

Power consumption (standard G)
Black level modulation approx 17 KVA
the level modulation approx 20 KVA
Power factor >= 0.93
Phase loading 30 A max.
Fuses 3 x 63 A

Operating enviroment
Air forced cooling approx 15 m3/min
Operating temperature -0 to +45°C
Reiative humidity 90%

Mechanical caracteristics
Height 1600 mm
Width (rack I + rack 2) 1200 mm
Depth 980 mm
Weight (rack I whitout HV transformer) 270 Kg
Weight (rack 2) 180 Kg
Weight HV transformer 240 Kg
 
 
 
  

ITEL S.r.l.
TELECOMUNICATIONS AND BROADCASTING SERVICES
Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY
Tel. +39 0434 997667 - Fax. +39 0434 997687