Product Detail

General. The FD 2C-BB Circularly Polarized Antenna series are designed for FM Broadcast Band ( 87.5 –108 MHz ). Each antenna is entirely made with stainless steel and composed of two folded dipoles and a mounting bracket.

Broadband. Suitable for channel or broadband operations with multi-channel combiners.

Omni-Directional. The azimuth pattern is normally circular and can be modified by the mounting structure presence. As an option, the circularity of the horizontal pattern in presence of mounting structure can be factory tested.

Antenna systems. Stacking more antennas it's possible to obtain customized patterns, increase the gain and the power handling capacity according to user requirements. Custom patterns, electrical beam tilt and null fill are available upon request.

Disassemblable. These antennas are disassemblable in order to reduce the shipment and stocking costs.

Easy installation. The standard mounting brackets are designed for instant installation on poles with diameters from 32 mm to 90 mm. Special brackets are available upon request.

Water, icing, moisture protection. The input connector is protected against rain and icing by a special housing. The internal balun is also protected against water, icing and moisture ingress by a sealed housing.

State of the art mechanical design, employing the finest materials (stainless steel, non-corrosive marine brass, silver plated copper, virgin PTFE) resulting in long life service.

Lightning resistance is guaranteed by the DC ground potential of the entire antenna.


	FD 2C-BB N Transmitting Antennas
	General. The FD 2C-BB Circularly Polarized Antenna series are designed for FM Broadcast Band ( 87.5 –108 MHz ). Each antenna is entirely made with stainless steel and composed of two folded dipoles and a mounting bracket. Broadband. Suitable for channel or broadband operations with multi-channel combiners. Omni-Directional. The azimuth pattern is normally circular and can be modified by the mounting structure presence. As an option, the circularity of the horizontal pattern in presence of mounting structure can be factory tested. Antenna systems. Stacking more antennas it's possible to obtain customized patterns, increase the gain and the power handling capacity according to user requirements. Custom patterns, electrical beam tilt and null fill are available upon request. Disassemblable. These antennas are disassemblable in order to reduce the shipment and stocking costs. Easy installation. The standard mounting brackets are designed for instant installation on poles with diameters from 32 mm to 90 mm. Special brackets are available upon request. Water, icing, moisture protection. The input connector is protected against rain and icing by a special housing. The internal balun is also protected against water, icing and moisture ingress by a sealed housing. State of the art mechanical design, employing the finest materials (stainless steel, non-corrosive marine brass, silver plated copper, virgin PTFE) resulting in long life service. Lightning resistance is guaranteed by the DC ground potential of the entire antenna.




	FD 2C-BB N Transmitting Antennas

	R.F. Data: Frequency Range 87.5 - 108.0 MHz Bandwidth Broadband Polarization Circular Connector N female Max. power handling capability 0.6 kW Gain (at mid band, ref. to l/2 dipole) -2.0 dBd VSWR (in the whole band) <1.35 : 1 Impedance 50 W Wind load (ref. 150 Km/h): Frontal 22 kg Lateral 25 kg Grounding Via clamps Mechanicals: Materials: External Stainless steel Inner conductor Silver plated brass Isolator PTFE Pole diameter 60 - 110 mm (others on request) Dimensions (HxWxD) 800x330x850 mm Weight 4.8 Kg

	ITEL S.r.l. TELECOMUNICATIONS AND BROADCASTING SERVICES Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY Tel. +39 0434 997667 - Fax. +39 0434 997687